I'm going to tell you how to install led tail light step by step. So let's get started.
Always check to make sure that the stock lights are working properly before
switching out to an aftermarket light.
Removal is very simple: lower the tailgate and remove the two T-20 corkscrews
holding the taillight assembly.
Pull out the taillight housing outward.
You'll see one plug light on the back of this Dodge light. Remove that one
plug.
Installation is very simple: just plug in the one connector and feed it
through the one hole that you see here in the body of the vehicle.
Line the tail light back up and push firmly into the vehicle.
Screw your screws back in.
Close your tailgate and make sure everything is wind up properly and check
the functions of the light.